HW QSFP-100G-eSR4 Compatible 100GBASE-ESR4 QSFP28 850nm 300m DOM MTP/MPO-12-12 MMF Optical Transceiver Module
HW QSFP-100G-eSR4 Compatible 100GBASE-ESR4 QSFP28 Optical Transceiver Module (MMF, 850nm, 300m, MTP/MPO, DOM)
The HW QSFP-100G-eSR4 Compatible QSFP28 Optical Transceiver Module is designed for use in 100GBASE Ethernet throughput up to 200m over OM3 MMF or 300m over OM4 MMF using a wavelength of 850nm via a MTP/MPO-12 connector. This transceiver is compliant with IEEE 802.3bm 100GBASE-SR4 and CAUI-4 standard. Digital diagnostics functions are also available via the I2C interface, as specified by the QSFP28 MSA, to allow access to real-time operating parameters.
With these features, this easy-to-install, hot swappable transceiver is suitable to be used at key locations optical networks like 100GBASE Ethernet.
Note: The FS P/N is changed from QSFP28-ESR4-100G to QSFP-ESR4-100G, but the product is the same. Only the FS P/N has been changed.
HW Compatible | QSFP-100G-eSR4 | Vendor Name | Longlife |
Form Factor | QSFP28 | Max Data Rate | 103.125Gbps (4x 25.78Gbps) |
Wavelengths | 850nm | Max Cable Distance | 200m@OM3/300m@OM4 |
Connector | MTP/MPO-12 | Media | MMF |
Transmitter Type | VCSEL | Receiver Type | PIN |
TX Power | -4~4dBm | Receiver Sensitivity | -12dBm |
Powerbudget | 1.9dB | Receiver Overload | 2.4dBm |
Power Consumption | ≤2.5W | Extinction Ratio | >2dB |
DDM/DOM | Supported | Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
CDR (Clock and Data Recovery) | TX & RX Built-in CDR | FEC Function | Support RS-FEC |
Protocols | IEEE 802.3bm, QSFP28 MSA, SFF-8665, SFF-8636, SFF-8679 | Warranty | 5 Years |